| #1 | |
|
|
Once I've made my tramp oil skimmer and removed the tramp oil, I'm going to
fill the sump with semi-synthetic coolant. The sump is a nightmare at the moment with a thick layer of sludge in the bottom; I was going to use a commercial sump cleaner, which you add to the coolant and circulate for 24 hours, but I can only buy 20l at a time at a cost of £80 so that's not very economical. Anyone have any suggestions for a home brew mix to do the job or will be a case of digging it out by hand and scrubbing it (again)? Martin -- martin<dot here>whybrow<at here>ntlworld<dot here>com |
| #2 | |
|
|
Martin Whybrow wrote:
> Anyone have any suggestions for a home brew mix to do the job or > will be a case of digging it out by hand and scrubbing it (again)? Dig it out by hand and do the rest with washing soda. At least that worked for me. Nick |
| #3 | |
|
|
Martin Whybrow wrote:
> Once I've made my tramp oil skimmer and removed the tramp oil, I'm going to > fill the sump with semi-synthetic coolant. The sump is a nightmare at the > moment with a thick layer of sludge in the bottom; I was going to use a > commercial sump cleaner, which you add to the coolant and circulate for 24 > hours, but I can only buy 20l at a time at a cost of £80 so that's not very > economical. Anyone have any suggestions for a home brew mix to do the job or > will be a case of digging it out by hand and scrubbing it (again)? > Martin If the sump is not galvanised or painted, try caustic soda (or drain cleaner). There was a tip here a while back, adding something like cinnamon oil to suds in order to make it smell nice and prevent bacteria forming sludge, but I can't remember the exact type of oil - anyone? --Peter Fairbrother |
| #4 | |
|
|
Peter Fairbrother wrote: > Martin Whybrow wrote: > > Once I've made my tramp oil skimmer and removed the tramp oil, I'm going to > > fill the sump with semi-synthetic coolant. The sump is a nightmare at the > > moment with a thick layer of sludge in the bottom; I was going to use a > > commercial sump cleaner, which you add to the coolant and circulate for24 > > hours, but I can only buy 20l at a time at a cost of £80 so that's not very > > economical. Anyone have any suggestions for a home brew mix to do the job or > > will be a case of digging it out by hand and scrubbing it (again)? > > Martin > > If the sump is not galvanised or painted, try caustic soda (or drain > cleaner). > > > There was a tip here a while back, adding something like cinnamon oil to > suds in order to make it smell nice and prevent bacteria forming sludge, > but I can't remember the exact type of oil - anyone? > probably citronella oil, the stuff in anti insect lamps Dave |
| #5 | |
|
|
"Peter Fairbrother" <zenadsl6186@zen.co.uk> wrote in message
news:46B30C5A.8020602@zen.co.uk... > Martin Whybrow wrote: >> Once I've made my tramp oil skimmer and removed the tramp oil, I'm going >> to fill the sump with semi-synthetic coolant. The sump is a nightmare at >> the moment with a thick layer of sludge in the bottom; I was going to use >> a commercial sump cleaner, which you add to the coolant and circulate for >> 24 hours, but I can only buy 20l at a time at a cost of £80 so that's not >> very economical. Anyone have any suggestions for a home brew mix to do >> the job or will be a case of digging it out by hand and scrubbing it >> (again)? >> Martin > > If the sump is not galvanised or painted, try caustic soda (or drain > cleaner). > > > There was a tip here a while back, adding something like cinnamon oil to > suds in order to make it smell nice and prevent bacteria forming sludge, > but I can't remember the exact type of oil - anyone? > > > --Peter Fairbrother I should have read this before I left work, I've got a 10l container of developer, which is basically KOH (caustic potash), solution under my bench , that's going to hang around until it gets thrown out. Hopefully the new coolant won't get smelly as it's semi-synthetic and, supposedly, anti-microbial. Martin -- martin<dot here>whybrow<at here>ntlworld<dot here>com |