C Scope TR 850-D

Hi everyone, I have just bought a C Scope TR 850-D from a car boot sale and
I was wondering if there is anywhere I can download the User Guide for it. I
used to have a motion detector years ago, but this isn't that type so I
would also appreciate any tips on how to set it up for use properly. It has
for knobs on it. One for on/off and tuning, one which says "reject", one
which says "sensitivity" and one that says "function" that you can switch
between "D1" and "D2". There is also a little press button on the end of the
handle. Any help would be greatly appreciated.

Many Thanks Wynne G Oldman.

Wynne G Oldman wrote:
> Hi everyone, I have just bought a C Scope TR 850-D from a car boot
> sale and I was wondering if there is anywhere I can download the User
> Guide for it. I used to have a motion detector years ago, but this
> isn't that type so I would also appreciate any tips on how to set it
> up for use properly. It has for knobs on it. One for on/off and
> tuning, one which says "reject", one which says "sensitivity" and one
> that says "function" that you can switch between "D1" and "D2". There
> is also a little press button on the end of the handle. Any help
> would be greatly appreciated.
>
> Many Thanks Wynne G Oldman.

Wynne,
Get hold of Martin Bass on the smartgroup. He runs C-Scope's
technical support section and "will" help you !

Jim

--
Find out what over 1990 detectorists have already found:
THE Metal detecting smartgroup
http://www.smartgroups.com/groups/detecting

Thanks Jim, I'll try that.

"Jim Sewell & Debbie Bone" <jim@sewell01.fsnet.co.uk> wrote in message
news:bk2e31$61c$1@newsg3.svr.pol.co.uk...
> Wynne G Oldman wrote:
> > Hi everyone, I have just bought a C Scope TR 850-D from a car boot
> > sale and I was wondering if there is anywhere I can download the User
> > Guide for it. I used to have a motion detector years ago, but this
> > isn't that type so I would also appreciate any tips on how to set it
> > up for use properly. It has for knobs on it. One for on/off and
> > tuning, one which says "reject", one which says "sensitivity" and one
> > that says "function" that you can switch between "D1" and "D2". There
> > is also a little press button on the end of the handle. Any help
> > would be greatly appreciated.
> >
> > Many Thanks Wynne G Oldman.
>
> Wynne,
> Get hold of Martin Bass on the smartgroup. He runs C-Scope's
> technical support section and "will" help you !
>
> Jim
>
> --
> Find out what over 1990 detectorists have already found:
> THE Metal detecting smartgroup
> http://www.smartgroups.com/groups/detecting
>
>

Thanks Jim, I'll try that.

"Jim Sewell & Debbie Bone" <jim@sewell01.fsnet.co.uk> wrote in message
news:bk2e31$61c$1@newsg3.svr.pol.co.uk...
> Wynne G Oldman wrote:
> > Hi everyone, I have just bought a C Scope TR 850-D from a car boot
> > sale and I was wondering if there is anywhere I can download the User
> > Guide for it. I used to have a motion detector years ago, but this
> > isn't that type so I would also appreciate any tips on how to set it
> > up for use properly. It has for knobs on it. One for on/off and
> > tuning, one which says "reject", one which says "sensitivity" and one
> > that says "function" that you can switch between "D1" and "D2". There
> > is also a little press button on the end of the handle. Any help
> > would be greatly appreciated.
> >
> > Many Thanks Wynne G Oldman.
>
> Wynne,
> Get hold of Martin Bass on the smartgroup. He runs C-Scope's
> technical support section and "will" help you !
>
> Jim
>
> --
> Find out what over 1990 detectorists have already found:
> THE Metal detecting smartgroup
> http://www.smartgroups.com/groups/detecting
>
>

Thanks Jim, I'll try that.

"Jim Sewell & Debbie Bone" <jim@sewell01.fsnet.co.uk> wrote in message
news:bk2e31$61c$1@newsg3.svr.pol.co.uk...
> Wynne G Oldman wrote:
> > Hi everyone, I have just bought a C Scope TR 850-D from a car boot
> > sale and I was wondering if there is anywhere I can download the User
> > Guide for it. I used to have a motion detector years ago, but this
> > isn't that type so I would also appreciate any tips on how to set it
> > up for use properly. It has for knobs on it. One for on/off and
> > tuning, one which says "reject", one which says "sensitivity" and one
> > that says "function" that you can switch between "D1" and "D2". There
> > is also a little press button on the end of the handle. Any help
> > would be greatly appreciated.
> >
> > Many Thanks Wynne G Oldman.
>
> Wynne,
> Get hold of Martin Bass on the smartgroup. He runs C-Scope's
> technical support section and "will" help you !
>
> Jim
>
> --
> Find out what over 1990 detectorists have already found:
> THE Metal detecting smartgroup
> http://www.smartgroups.com/groups/detecting
>
>

Thanks Jim, I'll try that.

"Jim Sewell & Debbie Bone" <jim@sewell01.fsnet.co.uk> wrote in message
news:bk2e31$61c$1@newsg3.svr.pol.co.uk...
> Wynne G Oldman wrote:
> > Hi everyone, I have just bought a C Scope TR 850-D from a car boot
> > sale and I was wondering if there is anywhere I can download the User
> > Guide for it. I used to have a motion detector years ago, but this
> > isn't that type so I would also appreciate any tips on how to set it
> > up for use properly. It has for knobs on it. One for on/off and
> > tuning, one which says "reject", one which says "sensitivity" and one
> > that says "function" that you can switch between "D1" and "D2". There
> > is also a little press button on the end of the handle. Any help
> > would be greatly appreciated.
> >
> > Many Thanks Wynne G Oldman.
>
> Wynne,
> Get hold of Martin Bass on the smartgroup. He runs C-Scope's
> technical support section and "will" help you !
>
> Jim
>
> --
> Find out what over 1990 detectorists have already found:
> THE Metal detecting smartgroup
> http://www.smartgroups.com/groups/detecting
>
>

Sorry about these multiple posts, I seem to be having a problem with my ISP.
I get mail delivered more than once as well!

"Wynne G Oldman" <wynne_g_oldmanSPAMOFF@ntlworld.com> wrote in message
news:BF39b.844$ni5.183@newsfep1-gui.server.ntli.net...
> Thanks Jim, I'll try that.
>
> "Jim Sewell & Debbie Bone" <jim@sewell01.fsnet.co.uk> wrote in message
> news:bk2e31$61c$1@newsg3.svr.pol.co.uk...
> > Wynne G Oldman wrote:
> > > Hi everyone, I have just bought a C Scope TR 850-D from a car boot
> > > sale and I was wondering if there is anywhere I can download the User
> > > Guide for it. I used to have a motion detector years ago, but this
> > > isn't that type so I would also appreciate any tips on how to set it
> > > up for use properly. It has for knobs on it. One for on/off and
> > > tuning, one which says "reject", one which says "sensitivity" and one
> > > that says "function" that you can switch between "D1" and "D2". There
> > > is also a little press button on the end of the handle. Any help
> > > would be greatly appreciated.
> > >
> > > Many Thanks Wynne G Oldman.
> >
> > Wynne,
> > Get hold of Martin Bass on the smartgroup. He runs C-Scope's
> > technical support section and "will" help you !
> >
> > Jim
> >
> > --
> > Find out what over 1990 detectorists have already found:
> > THE Metal detecting smartgroup
> > http://www.smartgroups.com/groups/detecting
> >
> >
>
>

> Sorry about these multiple posts,

I just thought you were VERY grateful !

"Wynne G Oldman"

Shouldn't that be "whinging old man" ?!

Talking about names, I know a guy who is a metal detectorist
and his name believe it or not is Justin Alan Field.
Justin A.Field !! - that is gospel !

Did you hear the one about the sarcastic cowboy?
His name was Tex Piss!

Theo

It's a pseudonym.

"Theo" <theodore.twyler@ntlworld.com> wrote in message
news:e2f9b.86$YL1.57392@newsfep2-win.server.ntli.net...
>
> "Wynne G Oldman"
>
> Shouldn't that be "whinging old man" ?!
>
> Talking about names, I know a guy who is a metal detectorist
> and his name believe it or not is Justin Alan Field.
> Justin A.Field !! - that is gospel !
>
> Did you hear the one about the sarcastic cowboy?
> His name was Tex Piss!
>
> Theo
>
>
>

Sorry to say that the smartgroup is under maintenance until the 19th now,
but Martin WILL help you with your problem !

Jim

Yes, I noticed it wasn't working. I managed to post a message requesting
Martin's help last night, but when I checked the site before, I found it
will be closed for a while. Just my luck. Anyway, thanks again for your
help.

Wynne G Oldman

"Jim Sewell & Debbie Bone" <jim@sewell01.fsnet.co.uk> wrote in message
news:bk4q4c$ofl$1@newsg2.svr.pol.co.uk...
> Sorry to say that the smartgroup is under maintenance until the 19th now,
> but Martin WILL help you with your problem !
>
> Jim
>
>

Hi Vince, thanks for the advice. I e-mailed them at lunchtime, requesting
the user manual and when I got home after work I had a reply from Kelly
Goodall who said she would send them to me immediately. What fantastic
service. A big thankyou to everyone at C Scope. Even though I didn't buy the
metal detector new, they took the time to offer me help. There aren't many
companies like that. Thoroughly recommended.

Wynne G Oldman.

"vince preston" <v.preston@btinternet.com> wrote in message
news:bk5l2n$ad2$1@hercules.btinternet.com...
> Check out C Scopes homepage.
> As they are adding user manuls, or will be able to help you if you contact
> them via e-mail.
> http://www.cscope.co.uk/onlinebrochure/scopeuk.htm
> Good luck.
> Vince
>
>
> "Wynne G Oldman" <wynne_g_oldmanSPAMOFF@ntlworld.com> wrote in message
> news:R9m9b.520$YL1.314707@newsfep2-win.server.ntli.net...
> > Yes, I noticed it wasn't working. I managed to post a message requesting
> > Martin's help last night, but when I checked the site before, I found it
> > will be closed for a while. Just my luck. Anyway, thanks again for your
> > help.
> >
> > Wynne G Oldman
> >
> > "Jim Sewell & Debbie Bone" <jim@sewell01.fsnet.co.uk> wrote in message
> > news:bk4q4c$ofl$1@newsg2.svr.pol.co.uk...
> > > Sorry to say that the smartgroup is under maintenance until the 19th
> now,
> > > but Martin WILL help you with your problem !
> > >
> > > Jim
> > >
> > >
> >
> >
>
>

	#1
Wynne G Oldman	C Scope TR 850-D Hi everyone, I have just bought a C Scope TR 850-D from a car boot sale and I was wondering if there is anywhere I can download the User Guide for it. I used to have a motion detector years ago, but this isn't that type so I would also appreciate any tips on how to set it up for use properly. It has for knobs on it. One for on/off and tuning, one which says "reject", one which says "sensitivity" and one that says "function" that you can switch between "D1" and "D2". There is also a little press button on the end of the handle. Any help would be greatly appreciated. Many Thanks Wynne G Oldman.

	#2
Jim Sewell & Debbie Bone	Re: C Scope TR 850-D Wynne G Oldman wrote: > Hi everyone, I have just bought a C Scope TR 850-D from a car boot > sale and I was wondering if there is anywhere I can download the User > Guide for it. I used to have a motion detector years ago, but this > isn't that type so I would also appreciate any tips on how to set it > up for use properly. It has for knobs on it. One for on/off and > tuning, one which says "reject", one which says "sensitivity" and one > that says "function" that you can switch between "D1" and "D2". There > is also a little press button on the end of the handle. Any help > would be greatly appreciated. > > Many Thanks Wynne G Oldman. Wynne, Get hold of Martin Bass on the smartgroup. He runs C-Scope's technical support section and "will" help you ! Jim -- Find out what over 1990 detectorists have already found: THE Metal detecting smartgroup http://www.smartgroups.com/groups/detecting

	#3
Wynne G Oldman	Re: C Scope TR 850-D Thanks Jim, I'll try that. "Jim Sewell & Debbie Bone" <jim@sewell01.fsnet.co.uk> wrote in message news:bk2e31$61c$1@newsg3.svr.pol.co.uk... > Wynne G Oldman wrote: > > Hi everyone, I have just bought a C Scope TR 850-D from a car boot > > sale and I was wondering if there is anywhere I can download the User > > Guide for it. I used to have a motion detector years ago, but this > > isn't that type so I would also appreciate any tips on how to set it > > up for use properly. It has for knobs on it. One for on/off and > > tuning, one which says "reject", one which says "sensitivity" and one > > that says "function" that you can switch between "D1" and "D2". There > > is also a little press button on the end of the handle. Any help > > would be greatly appreciated. > > > > Many Thanks Wynne G Oldman. > > Wynne, > Get hold of Martin Bass on the smartgroup. He runs C-Scope's > technical support section and "will" help you ! > > Jim > > -- > Find out what over 1990 detectorists have already found: > THE Metal detecting smartgroup > http://www.smartgroups.com/groups/detecting > >

	#7
Wynne G Oldman	Re: C Scope TR 850-D Sorry about these multiple posts, I seem to be having a problem with my ISP. I get mail delivered more than once as well! "Wynne G Oldman" <wynne_g_oldmanSPAMOFF@ntlworld.com> wrote in message news:BF39b.844$ni5.183@newsfep1-gui.server.ntli.net... > Thanks Jim, I'll try that. > > "Jim Sewell & Debbie Bone" <jim@sewell01.fsnet.co.uk> wrote in message > news:bk2e31$61c$1@newsg3.svr.pol.co.uk... > > Wynne G Oldman wrote: > > > Hi everyone, I have just bought a C Scope TR 850-D from a car boot > > > sale and I was wondering if there is anywhere I can download the User > > > Guide for it. I used to have a motion detector years ago, but this > > > isn't that type so I would also appreciate any tips on how to set it > > > up for use properly. It has for knobs on it. One for on/off and > > > tuning, one which says "reject", one which says "sensitivity" and one > > > that says "function" that you can switch between "D1" and "D2". There > > > is also a little press button on the end of the handle. Any help > > > would be greatly appreciated. > > > > > > Many Thanks Wynne G Oldman. > > > > Wynne, > > Get hold of Martin Bass on the smartgroup. He runs C-Scope's > > technical support section and "will" help you ! > > > > Jim > > > > -- > > Find out what over 1990 detectorists have already found: > > THE Metal detecting smartgroup > > http://www.smartgroups.com/groups/detecting > > > > > >

	#8
Jim Sewell & Debbie Bone	Re: C Scope TR 850-D > Sorry about these multiple posts, I just thought you were VERY grateful !

	#9
Theo	Re: C Scope TR 850-D "Wynne G Oldman" Shouldn't that be "whinging old man" ?! Talking about names, I know a guy who is a metal detectorist and his name believe it or not is Justin Alan Field. Justin A.Field !! - that is gospel ! Did you hear the one about the sarcastic cowboy? His name was Tex Piss! Theo

	#10
Wynne G Oldman	Re: C Scope TR 850-D It's a pseudonym. "Theo" <theodore.twyler@ntlworld.com> wrote in message news:e2f9b.86$YL1.57392@newsfep2-win.server.ntli.net... > > "Wynne G Oldman" > > Shouldn't that be "whinging old man" ?! > > Talking about names, I know a guy who is a metal detectorist > and his name believe it or not is Justin Alan Field. > Justin A.Field !! - that is gospel ! > > Did you hear the one about the sarcastic cowboy? > His name was Tex Piss! > > Theo > > >

	#11
Jim Sewell & Debbie Bone	Re: C Scope TR 850-D Sorry to say that the smartgroup is under maintenance until the 19th now, but Martin WILL help you with your problem ! Jim

	#12
Wynne G Oldman	Re: C Scope TR 850-D Yes, I noticed it wasn't working. I managed to post a message requesting Martin's help last night, but when I checked the site before, I found it will be closed for a while. Just my luck. Anyway, thanks again for your help. Wynne G Oldman "Jim Sewell & Debbie Bone" <jim@sewell01.fsnet.co.uk> wrote in message news:bk4q4c$ofl$1@newsg2.svr.pol.co.uk... > Sorry to say that the smartgroup is under maintenance until the 19th now, > but Martin WILL help you with your problem ! > > Jim > >

	#13
Wynne G Oldman	Re: C Scope TR 850-D Hi Vince, thanks for the advice. I e-mailed them at lunchtime, requesting the user manual and when I got home after work I had a reply from Kelly Goodall who said she would send them to me immediately. What fantastic service. A big thankyou to everyone at C Scope. Even though I didn't buy the metal detector new, they took the time to offer me help. There aren't many companies like that. Thoroughly recommended. Wynne G Oldman. "vince preston" <v.preston@btinternet.com> wrote in message news:bk5l2n$ad2$1@hercules.btinternet.com... > Check out C Scopes homepage. > As they are adding user manuls, or will be able to help you if you contact > them via e-mail. > http://www.cscope.co.uk/onlinebrochure/scopeuk.htm > Good luck. > Vince > > > "Wynne G Oldman" <wynne_g_oldmanSPAMOFF@ntlworld.com> wrote in message > news:R9m9b.520$YL1.314707@newsfep2-win.server.ntli.net... > > Yes, I noticed it wasn't working. I managed to post a message requesting > > Martin's help last night, but when I checked the site before, I found it > > will be closed for a while. Just my luck. Anyway, thanks again for your > > help. > > > > Wynne G Oldman > > > > "Jim Sewell & Debbie Bone" <jim@sewell01.fsnet.co.uk> wrote in message > > news:bk4q4c$ofl$1@newsg2.svr.pol.co.uk... > > > Sorry to say that the smartgroup is under maintenance until the 19th > now, > > > but Martin WILL help you with your problem ! > > > > > > Jim > > > > > > > > > > > >